LEDSON Pollux9+ Gen2 - LED SPOTLIGHT WITH WHITE AND ORANGE POSITION LIGHT - 120W

LEDSON Pollux 9+ is equipped with selectable yellow-orange or xenon white position light.

Compared to the first generation of Pollux9+, the Gen2 Driving Beam gives you 65 meters longer light reach at 1 lux.

TIR reflectors
TIR stands for Total Inner Reflection and means that all light is effectively reflected and directed before it is sent out from the reflector. The spill light (the light that is not directed but which disappears "unfocused" from the light without making any real use) is minimized. A traditional reflector directs and focuses most of the light but far from everything.

In summary, you get more efficient light on the road and take full advantage of every LED on the auxiliary light with the TIR reflectors!

Driving Beam light image
Driving beams reflectors are all computer generated and manufactured to provide a similar light image as combo but more consistent and within the limits of what is legal. It mimics and enhances the car's existing headlight and light image

Specifications:
- E marked (E8, ref. 37,5 , ECE R112 / R10 / R7 (white position light)
- EMC secured (does not disturb the radio)
- With position light (4 LEDs) yellow-orange or xenon white (connect the color you want)
- Range Driving Beam: 960 m (0.25 lux), 480 m (1 lux)
- 12000 lumens (theoretical), 9600 lumens (actual)
- Cold White Light (6500 K)
- TIR optical system (Total Inner Reflection)
- Pressure equalization membrane
- 36 month warranty

Technical data:
- 120 W (12 x 10 W Cree XM-L2 LED)
- Rated power 92,4 W
- IP68 (water / dust tight)
- DT connector (4-pin) included
- Electronic heat management
- Voltage 9-36 V
- Load 7,7 A @ 12 V and 3,6 A @ 24 V

Measurement & weight:
- Width: 218 mm
- Height: 234,5 mm (inkl fäste)
- Depth: 68,5 mm
- Weight: 1,9 kg

Supplied:
- Pollux9+ Gen2 Ledson LED auxiliary light
- Bolts and screws for attaching the auxiliary light with either one or two attachment points
- DT connector (4 pin)
- Installation instructions

Installation instructions for cables (detailed instructions included with the product):
- Red: Auxiliary light (+)
- Black: Auxiliary light / Position light (- ground)
- White: Position light (+) white light
- Yellow: Position light (+) yellow-orange light

NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and the warranty will cease to apply.