This bar has a combo light pattern, which means that some diodes are aimed closer to the vehicle, spreading the light over a wide area, while the other LEDs are focused far away, giving far-reaching light. The best of two worlds!
What more is needed?
DT-relay: We strongly recommend using our DT relay with original connection to connect the LED bar to the vehicle. You can then choose between controlling the bar with a button or switching it on with the main beam (the bar lights up and goes off automatically when the main light is on and off, as most people prefer). There is also a fuse between external light and battery to prevent possible damage to battery and other equipment. Detailed installation instructions are included with the DT relay.
Mounting on the vehicle: Can be mounted directly on the vehicle (drill in a suitable place) or a little smoother with the help of a license plate holder or pipe bracket. See our various accessories for mounting options.
Combo Beam light pattern
E-marked ECE R112 (ref. 50)
ECE R10 (EMC-secured)
Range: 472m (1 lux)
Lumen: 16200 lm (theoretical), 13700 lm (actual)
Color temperature 6000K (kallvit)
Dual mounting options
140W (36 x 5 W LP LED)
IP68 (water / dust tight)
IP69K: withstands hot water under pressure
Aluminum housing and polycarbonate lens
DT connector (supplied)
Alfa 20" LED bar
Sliding brackets (standing / hanging)
Bolts and screws to secure the bar to a suitable surface
Dimensions & weight (excl. brackets)
Width: 522 mm
Height: 58 mm
Depth: 53 mm
NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply. DT connector (male) with joint included with the product.